From: Johannes Truschnigg Date: Thu, 17 Mar 2022 20:44:42 +0000 (+0100) Subject: Typo fixes X-Git-Url: https://johannes.truschnigg.info/gitweb/?a=commitdiff_plain;h=f99c9fb3459ecf53bcaf540b09e89fbe10959e63;p=sqm_lagthrottle Typo fixes --- diff --git a/lagdetect.sh b/lagdetect.sh index c7aeac6..37769dc 100755 --- a/lagdetect.sh +++ b/lagdetect.sh @@ -24,16 +24,16 @@ # These will be docmented once this is finished - promise ;) FUDGE_MS=20.0 # "fudge" factor in msec that yor PING_PEERS are expected to fluctuate in latency under normal conditions -THRESHOLD=1.2 # factor relevant in judging crrent latency compared to avg. - leave it at 1.2 +THRESHOLD=1.2 # factor relevant in judging current latency compared to avg. - leave it at 1.2 PING_PEERS='1.1.1.1 8.8.8.8' # space-separated list of peer addresses to ping PING_GW_IPV4=no # do not use - broken PING_GW_IPV6=no # do not use - broken -PING_SLOTS_PER_PEER=5 # number of samples per PING_PEER to collet averages over +PING_SLOTS_PER_PEER=5 # number of samples per PING_PEER to calculate averages over PING_INTERVAL=300 # interval in msec to emit ICMP ECHO towards each PING_PEER STATS_RX='/sys/class/net/eth1/statistics/rx_bytes' # downstream bandwidth accounting file for your SQM'd interface IFACE_RX='ifb4eth1' # interface to apply downstream SQM to STATS_TX='/sys/class/net/eth1/statistics/tx_bytes' # upstream bandwidth accounting file for your SQM'd interface (presently not used) -IFACE_TX='eth1' # interface to apply downstream SQM to (presently not used) +IFACE_TX='eth1' # interface to apply upstream SQM to (presently not used) BW_MIN_RX=10000 # your min. acceptable downstream bandwidth to shape to in Kbps BW_MAX_RX=30000 # your max. desired downstream bandwidth to shape to in Kbps